Захотел я приупить шнур OBD/2 -> USB для диагностики ошибок.
Вопрос #1:
Подойдет ли либой кабель с протоколом OBD/2?

OBDII V600
- This cable works on all VW, Audi, Seat and Skoda vehicles with a 16 Pin Diagnostic Connector.
- Can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus.
- Terminal K = bus of communication
- Terminal L = ignition for waking up car computing system (ECU: Engine Control Unit)
- This K/L diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only
-Supported also ISO9141 protocol; supports VAG-COM version 409.1 or older
- The Cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.
http://www1.dealextreme.com/producti...ku_37633_1.jpg


Вопрос #2 : Как называется программа для диагностики и где ее взять!

Зарание спасибо))